Suit Led lighting with external driver.For instance,LED panel,LED downlight,LED spotlight..
LED Lighting emergency conversion kits slim case-VL053C018CL-B-SLIM CASE
LED Emergency Conversion Kits
VL series VL053C018CL-B
10-90V output voltage self-adaptation
Product Description
1.The emergency conversion kits includes the inverter, battery pack and the LED charging indicator,test switch
2.Allows the charger to trickle charge the battery pack in standby mode, Automatically activates when power failure
3.Maintained Mode
4.Equipped with LiFePO4 battery
5.220-240V/110-240V two ways input voltage
6.Constant power voltage self adaption
Range of Application
1.Suit Led lighting with external driver.For instance,LED panel,LED downlight,LED spotlight..
2.For Led lighting 6-80W
3.Output voltage is 10-90V,emergency power is reduced to be 1-5W
4.Used at 0-+45 environment temperature
5.The biggest output voltage is up to 90V,suit to be installed in the lamp body
6.Double insulation design
Product Specification
1.Intelligent IC control circuit, emergency power automatically light on in case of power outage and converted to charging status when electricity power back to work well
2.Hours of emergency duration which also can be customized.When mian power is off,the emergency controlgear can supply 1 to 3 hours duration
3.The efficiency is as high as 90%,power is less than 0.5 watts in standby mode
4.The conversion time is less than 0.1 seconds
5.Battery can be installed in the case or outside
6.The controlgear can be intended for use in luminaries for high-risk task area lighting
7.Do not make the battery polarity reverse
8.Double/reinforced insulation
9.The battery will be recharged normally when the fuse was broken (after the fuse was changed)
10.Charge 24 hours before testing the emergency duration
Technical Data
LED Emergency Conversion Kits
VLB series
Inner package material |
PC/ABS |
Input Voltage |
AC 220V-AC240V,50HZ/60HZ; |
Emergency time |
3hours |
Emergency conversion time |
Less than 0.1Sec |
Charging time |
24h |
Emergency output Voltage |
DC 10-90V voltage self-adaptation |
Battery model |
LiFePO4 battery |
LED charging indicator |
Green |
Test switch |
Not equipped |
Protection |
Over-charge/Over-discharge/Shirt circuit/No load protection |
Fuse |
T2a-250v - Patch slow fuse -1808:2A |
PF |
>0.5 |
Wiring diagram
Installation
1.LED emergency power kit can be designed as split type emergency power for convenient installation and usage.
2.LED emergency power kit also can be made as boxed one-piece emergency power that includes a full set of power and accessories. It consists of inverter, battery pack, metal casing, test button, LED indicator and waterproof joint or connector.
3.L (line) and N (neutral) must be charged frequently, external connection with control switch is prohibited
4.Comply with the wiring diagram strictly to connect circuit in other conditions.
Battery model
Accessories
Note:1.Core of cable should be 0.5-1.5mm,Wire stripping length should be 5-6.5mm
2.Ultimate protection against electric shock: consider through integral lamps
LED Emergency Conversion Kits VL series
CE approved
Charge current |
0.05C(1c=capacity) |
||||||||
Charge voltage |
11V |
||||||||
Output current |
30-100mA |
||||||||
Emergency Mode |
Constant power |
||||||||
Output power |
2w |
||||||||
Inverter dimensions |
123×79×33mm |
||||||||
Product weight |
200g |
||||||||
|
|
||||||||
Item No. |
Battery |
Emergency power |
Emergency time |
Charge current |
|||||
VL053B018CL-B |
LiFePO4 6.4V 1500mAh |
2W |
3hours |
75mA |
|||||
Item No. |
Spec |
Length |
Quantity |
||||||
LED Charging indicator |
2*0.3 cable |
30cm/Custom desigh |
1 |